Homemade Instruments

Making DIY Castanets

It has been a little while – about 1 1/2 months – since I last wrote a blog post showing you how to make a musical instrument at home, so I thought it was high time I did a new one. This time, I have made a couple of pairs of castanets. There are different ways to make these instruments, but this is how I made them today.

What is a castanet?

Firstly, what is a castanet? A castanet is a percussion instrument, known particularly for their role in Spanish Flamenco music although they feature in music of many more traditions and cultures. They were traditionally made of hardwood, although fibreglass is becoming more popular, and of course castanets that are suitable for children, especially young children, are often made from plastic. A pair of castanets (each instrument is a pair already) is played by clicking or hitting the pair together. Two pairs are played together, one in each hand and each pair would make a slightly different sound.

How to play the castanets

There are different ways to play, but here are three simple ways to play that you can use at home:

  • Hold a pair of castanets in one hand looping the string over your index finger. Put your index finger on one side of the pair of castanets and your thumb on the other. Open and close your index finger and thumb to click the castanets together.
  • Put the pair of castanets on the floor and tap on the top of it with your hand.
  • Put the pair of castanets in one hand and use the other to tap on the top of it.

I don’t have a pair of castanets to demonsrate for you, but here is a short video of castanets in action.

Making your own castanets

You can make your own castanets with some very simple things that you may already have at home. You will need:

  • Craft sticks (I used large, plain craft sticks because that is what I have at home, and also once the castanets were made I could leave them for my children to decorate)
  • Bottle tops (I used beer bottle tops, obviously it was a chore for me to have to drink the beer in order to get the bottle tops. Any bottle tops would work)
  • Small amount of cardboard
  • Elastic bands
  • Scissors
  • Glue (I used a hot glue gun, but other glues or even sticky tape would probably work just as well)

Firstly I hot glued the bottle tops onto the craft sticks, making sure that the bottle tops were roughly level with each other.

Next, I put the craft sticks together so that the bottle tops were touching each other. I placed an elastic band at the other end of the craft sticks and tried to play the castanets. They did not quite work, as there was nothing there to make the craft sticks spring away from each other after they have been tapped together.

So I cut a small piece of cardboard, mine was slightly wider than my craft sticks, but I could have made more effort to make the cardboard the same width, or thinner than my craft sticks. I folded the cardboard into a V shape and hot glued the cardboard to each of the craft sticks so that the open side of the V faced upwards towards the bottle tops. The cardboard, which made a lever inside the castanet, was approximately half way up and I took care to ensure that the bottle tops would still be level with each other.

I made two pairs of castanets, one for each of my children. I found that one of the pairs of castanets worked best with an elastic band would around the bottom underneath the cardboard lever, and one of the worked best without the elastic band. Here they are in action:

Now it will be over to my children to decorate them however they see fit.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s